This is a updated review on this product, there have been a lot of new sellers on amazon selling products that have few reviews and not delivering the item at all. This is not that type of seller.
The purchase:
Product was initially held up for some reason, i am guessing ups errors. I reached out to the seller who promptly told me thew day they would ship it. I am assuming that the ups system hung up because i had reached out to the seller with a complaint on the tracking it and not showing that it shipped. They quickly responded and corrected the issue with ups, and had them expedite the product. I received it the very next day. Shipping can be frustrating. Especially when you are running a business that relies on the product you are buying. Not only was this seller pomp to respond. They also offered a solution.

The product: The product is way better than the pictures i will break down the assembly and other processes below.

Packaging: Packaging on the product was very well done, and i would not imaging anything would break for someone because they do a very good job at getting this into a small form factor, i was extremely shocked that they were able to consolidate the product into such a small box and form factor. So moving the box inside or up and down stairs by yourself should not be a problem. It is heavy, but not awkward. unpacking is a challenge however. I recommend you lay the box flat and carefully cut the cardboard on the edges with a shallow box cutting blade, or you could be brave like i did and use the normal box flaps and try to slide it out the packaging, but be careful! The product is layered and the metal rods might go everywhere. If i were to order another one i would go the flat route next time. All the corners of the wood are packed with corner protectors, so really i was worried about scratching the finish on the metal, however this is not a cheaply made product and the finishes are very durable. The manufacturer must of been very mindful of the parts bags, because it is very easy to pull the parts out of the zip bags and not fighting to try to only get the amount of bolt you need out. One bag was missing a a lable. I found the size of the bolt with my digital caliber.

Whats included: You get the desk, a instruction manual, and the tools required to assemble it. Which is a small wrench screw driver and a Allen key.

Instruction manual: Instruction manual is very well written. A lot of thought went into how it is assembled, the labeling of parts, and their correlation to the instruction steps. It's not over complicated, they do not over instruct use too many part numbers, and i believe the steps listed in the manual is the most efficient way to build this product.

Assembly, this desk is modular. The keyboard and monitor holder can be on ether side so keep that in mind when assembling. This desk is VERY long, and heavy made with high quality parts. There for I RECOMMEND ASSEMBLING IN THE SPOT ITS GOING TO BE IN. I had my father over who is helping me set up my workshop and assemble everything so i don't have too much downtime in the engineering office. With the two of us it was difficult to move the desk 5 feet towards the wall it was going to sit against.
I recommencement after getting the frame assembled before mounting the engineering wood to move the frame where it is going to stay permanently. If you are by yourself good luck moving this. Assembly took me and my father 12 minutes with a drill, and the correct size Allen key bit. You start with the metal frame and the wood goes on last, so i recommend setting the wood pieces to the side until needed. Very easy to assemble, i am confident that by myself without any power tools and using the ones provided i could assemble this in 20 minutes. I recommend Threading all the bold into the holes just to hold the rods on then going and tightening everything after. The keyboard tray was the hardest part on this to assemble. Hopefully the seller can improve here because i'm not sure if the screw driver would tap into the metal on the keyboard assembly part. It would defiantly help if the holes came tapped. If you don't have second person to hold the keyboard tray sliding rail together while you are trying to put the screws in. I'd recommend tape it down with masking tape on each in while you get the screws in.

Quality: Product is very strong, has scratch resistant finish, that is very nice to look at. The wood isn't cheap, its heavy duty. I thought it be partial board, however I'm sure it's engineering board, The metal paint isn't cheap ether, its actually a very well done fine powder coat that matches the texture of the desk top. The plug on the top is nice. On the right side i have my 3D printer a soldering work station ESD pad, and a full microscope, my desktop computer/engineering workstation sits in the middle In a full size ATX case, and on the left side i have room for a small sound bar and a swinging monitor mount. So as far as size goes, i am quite pleased to find everything will fit like i wanted it too. Desk is stable with very little wobble. Which makes soldering on it easy. Lots of room to store stuff in middle area. The bolts didnt strip out at all and i can see this desk being broken down and assembled multiple times without wear on the hardware.

Conclusion: I ordered 13 pieces of office furniture, and out of those this product has the best quality. Otherwise i would not of taken this time to write such a in depth review. It was well packed, had excellent instructions, fantastic build quality, If you are considering a practical good quality desk that will last, this is a fantastic choice and product.

I normally do not write reviews but based on the negative reviews I almost did not buy this desk. I’m so happy I reconsidered!
The desk arrived two weeks early, actually it only took three days to get it. The box had slight damage but it was obvious the company heard the previous complaints and the unit was packaged well, including corner protectors on all the boards. The boxed unit is very heavy so have help getting it into the house or unpack it and bring it in a few pieces at a time.
It was time consuming to assemble (approx 2 hours) but that was about what I expected.
A couple tips for others who purchase this unit. Take the time to review every step of the instructions before beginning especially to identify the different horizontal frame pieces. Separating them to begin with, will avoid installing the wrong one and thus save time.
I took a piece of cardboard and wrote the letters A, B, etc and piled the screws from the corresponding bag next to the letters.
Snug but do not tighten bolts and be prepared to back them out, especially on the center section, in order that the wood pieces fit properly. Start each screw, that goes into the plastic plugs from below, with only a couple threads. Make sure they are all started before beginning to tighten any of them and only slightly snug them, until the whole desk is assembled. Remember to loosen the screws going into the ends of the horizontal bars, if necessary, to accomplish proper alignment of all the holes.
Once you have the desk assembled and all screws snug, go around and finish tightening them but don’t over tighten. I used my drill driver on the lowest torque setting.
I found it easiest to work on the center section with it upside down until it came time to install the top wood piece. For the top wood pieces I made sure all of the screws were started, then made sure they aligned properly from a top view, before snugging them.
Taking your time is the key and well worth it.

Great desk for the price. Been using it for a couple of months at this point and I have not once regretted purchasing this. wasn't very hard to put together, only took about an hour or so and I didn't try to be speedy